Autoclave Sterilization Using Baglog or Heating / Steamer

Autoclave Sterilization Using Baglog or Heating / Steamer
Baglog sterilization using an autoclave or heating / steamer takes relatively briefly, just for 15 minutes. Heating this way is done pulau pramuka  at 121 ° C. The trick is quite simple, baglog who are ready and already sterilized materials must first be staying put in the autoclave. Advantages baglog sterilization using this method is that it can save you time, but high costs for investment tool. However for long term cultivation and berskinambungan it will be more profitable.

Sterilization Baglog Using Oil Drum
Baglog sterilization using less expensive drums have an advantage when compared to sterilization using an autoclave or heater / steamer so as to reduce the cost of production. But take a long time in the sterilizing process. In addition, oil drums must be large in order to accommodate a capacity of approximately 50 baglog to save time so that also can reduce the cost of production. Ways baglog sterilization using this method is actually also quite easy, that is enough oil heating on the stove or fire. The length of time required for the BUAHPOKER.COM AGEN POKER DOMINO ONLINE UANG ASLI INDONESIA TERPERCAYA TANPA ROBOT heating process about 8 hours.

COOLING
After performing the sterilization process, both material and sterilization sterilization baglog, the next step is the cooling process. In this poses, baglog sterilized earlier, ie for 15 minutes for sterilization using an autoclave or heating / steamer and 8 hours for sterilization using drums, baglog must be cooled before planting. Make sure baglog has become cold before planting, just after a really cold then planting seed oyster mushrooms.